You will need to confirm the system shutdown. When going to end the use of the system at the end of your event/class, please click on the button End Session in the bottom left-hand corner of the touch panel. While Display Mute is active it will flash green and the original state color. If at any point you wish to turn off the screen so the audience doesn't see what you are doing, click on the Display Mute button and this will blank the projector screen while this function is active. To read more about the microphones check out our article Get To Know The Classroom: Wireless Microphones. The drawer will be locked via a key that is available for checkout via the Registrar Office. Two handheld microphones and one lapel microphone are stored in the drawer in the podium. The Auditorium features 3 wireless microphones to use within the room. These controls will be on the devices and independent from the room audio control.
#4X3 SCREENS FOR MAC WINDOWS#
Individual components such as the in-room Mac, in-room Windows PC, Blu-Ray player, or personal device can also have audio controls. The Mute button will illuminate when active to prevent audio from being passed through the system to the room speakers. The up and down arrow key buttons will raise and lower the volume. Under the System Volume section on the control panel is an overall system volume control. There is also a lighting control interface on the sidewall of the stage. Different light levels and scenes are available by selecting the different buttons on the interface. Using the touch panel, you can control the room lighting under the Lights section on the control panel. Keep in mind that if you use a personal machine, you will need to bring your own adapters to use HDMI or VGA if your machine does not have the ports directly available. Once the touch panel system has loaded, and the screen format is chosen, you may choose the source you wish.
This allows the best experience for the room. Select the same mode as the touch panel for the operating mode.
#4X3 SCREENS FOR MAC PC#
These are the option for how the projectors are displayed on the projection screen.Īfter you have logged into the PC in the room you will be prompted to choose a Dual Screen or Wide Screen setting via a pop-up window. If you are also using the in-room PC a corresponding mode selection window will be presented once you have logged in. Screen Operating Modeįrom the touch panel you will select during the boot-up of your session what operating mode you would like the screens. Please be aware of this in order to prep for any class or event time. It will take roughly 3-5 minutes to initialize the system completely.
#4X3 SCREENS FOR MAC PASSWORD#
If you have not used the auditorium and need to know what the session password is please contact Classroom Technology. To begin a session touch the Welcome screen on the touch panel to bring up the password interface. When you first interact with the touch screen it may be in a standby mode so you may need to touch and wake it. If you have any questions or concerns about the room please contact the Classroom Technology Department at or 31.
0 kommentar(er)
